Matsutec AIS Transponder

Model Number: HA-102-#1284 Brand Name: Matsutec Key Specifications/Special Features: Matsutec class B AIS transponderModel: HA-102FeaturesElectrical function is accordance with IEC 62297-1Dual channel function: two TDMA receivers are receiving datum in two independent channels at the same time, and one TDMA transmitter is transmitting in two independent channels alternately.CSTDMA function can avoid and solve communication conflict.
Transponder has external serial data interface (RS-422, RS-232).
Transmit and receive safety message, and equipped with "SOS" safety button.
Support three operation mode: carrier-sense mode, assigned mode and polled mode.
Internal GPS receiver, as data source for position, COG and SOG can be connected to all devices compatible to GPS and PC, PDA, ECDIS, RADAR and more.
Alarm and indication (via LED) for power, error, time-out, status.

Specifications

Standards

IEC 62297-1
IEC 61162-1
IEC 60945-2002

VHF receiver

Frequency range: 156.025MHz - 162.025MHz
Channel bandwidth: 25kHz
Number of AIS receivers: 2 receiver (one time shared between AIS/DSC)/1 transmitter
CH-1 default CH 87B (161.975MHz)
CH-2 default CH 88B (162.025 MHz)
Number of DSC receiver: 1 (CH 70)
RX DSC: 156.525MHz
Max. usable sensitivity: PER less 20% at -107dBm

VHF transmitter
Power output: 2 watt (33dBm ±1.5dB)
Modulation: GMSK/FM
Data rate: 9.6Kdps/per channel
Modulation spectrum: IEC 62287

DSC receiver
Modulation: 1300Hz/2100Hz FSK
Data rate: 1200bps ± 30ppm
Spurious response rejection: over 70dB for signal @ -104dBm, BER less 1%
Blocking: more 84dB for signal @ -104dBm, BER less 1%

GPS receiver
Receiving channels: 12 channels
Acquisition sensitivity: -140dBm
Tracking sensitivity: -150dBm
Position accuracy: <2.5m CEP (GPS) without SA
Output rate: 1Hz

Power supply
Supply voltage: 12V DC (10V - 20V)
Power consumption: Less than 10W

Main unit
4 LED indicator working status
1 on/off switch

Interface
Ports: NMEA 0183/RS-422/RS-232
GPS antenna (optional): female TNC connector
VHF antenna (optional): female type M connector
(Type N connector optional)
Physical
Size in mm (W): 234mm
Size in mm (H): 40mm
Size in mm (D): 167mm